| Maximum axial люфт bearings of naves, mm |
0.05 |
| The maximum axial palpation of naves, mm |
0.05 |
| Effort at a continuous tightening of a nut of the bottom spherical support on the fifth turn, Nanometer |
1.0 ÷ 3.4 |
| Effort at a continuous tightening of a nut of the hinge of a rack of the stabilizer on the fifth turn, Nanometer |
0.05 ÷ 1.0 |
| Tension of a belt of a drive of pump GUR |
Options and car routine maintenance see |
| Difference of levels of liquid ГУР at the working and muffled engine, mm |
No more than 5 mm |
| Pressure of liquid ГУР at the engine working on single turns and closed valve SST, атм |
Not less than 77.5 |
| Difference of pressure of liquid ГУР at the engine working on 1000 rpm both 3000 rpm and open valve SST, атм |
No more than 4.8 |
| Pressure of liquid ГУР at the engine working on single turns at open valve SST and the steering wheel turned in extreme position, атм |
Not less than 77.5 |
| Люфт a steering wheel, mm |
No more than 30 |
| Effort of turn of a steering wheel, Nanometer |
5.9 |
| Palpation the helmsman рейки, mm |
No more than 0.03 |
| Preloading of the steering mechanism, Nanometer |
0.8 ÷ 1.4 |
| Height of a forward suspension bracket |
259 |
| Height of a back suspension bracket |
316 |
| Disorder of forward wheels |
-0°20 ' ± 45' |
| Difference of disorders of the right and left wheels |
No more than 45' |
| Выбег forward wheels |
-2°05 ' ± 45' |
| Difference выбегов the right and left forward wheels |
No more than 45' |
| Inclination of an axis of turn of forward wheels |
12°10 ' ± 45' |
| Difference of inclinations of an axis of turn of the right and left forward wheels |
No more than 45' |
| Full convergence of forward wheels |
0°06 ' ± 12 ' (1 ± 2 mm) |
| Difference of residual lengths of tips of steering draughts, mm |
No more than 1.5 |
| Limiting angles of rotation of forward wheels |
|
|
31°03 ' ± 1°30' |
|
|
27°50' |
| Disorder of Vybeg of back wheels |
-0°35 ' ± 45' |
| Full convergence of back wheels |
0°18 ' ± 12 ' (3 ± 2 mm) |
| Difference of distances from a disk of the right/left back wheel to a corner of the corresponding clown of adjustment of convergence of back wheels, mm |
No more than 3.0 |
| Wheel nuts |
103 |
| Bolts of fastening of assemblage of a forward brake support |
107 |
| Fixture of the holder of electroconducting of the back gauge of speed ABS to the shock-absorber |
5 |
| Bolt of fastening of the holder of a flexible brake hose and electroconducting of the gauge of speed ABS to the shock-absorber |
29 |
| Bolt of fastening of forward gauge ABS |
8 |
| Bolt of fastening of back gauge ABS |
20 |
| Nuts of fastening of a rack of a forward suspension bracket to a rotary fist |
210 |
| Nuts of fastening of a rack of a back suspension bracket to ступичной to assemblage |
255 |
| The top nuts of fastening of a rack of a forward suspension bracket |
80 |
| The top nuts of fastening of a rack of a back suspension bracket |
39 |
| Nut of fastening of a tip of steering bent for to a rotary fist |
49 |
| Counternut of fastening of a tip to steering draught |
74 |
| Fixture of the bottom spherical support to the bottom lever of a forward suspension bracket |
127 |
| Nut of fastening of the bottom spherical support to a rotary fist |
123 |
| Bolt of the bottom lever of a forward suspension bracket |
206 |
| Bolts of fastening of a protective casing of a rotary fist |
8.3 |
| Bolt of the central bearing of a power shaft |
32 |
| Bolt of fastening of the tank of a brake liquid |
8.8 |
| Nut of fastening of a spring of a rack of a suspension bracket |
49 |
| Nuts of fastening of racks of stabilizers of a suspension bracket |
39 |
| Fastening bolts скоб suspension bracket stabilizers |
19 |
| Bolts of fastening of a back brake support |
47 |
| Bolts of fastening of a cable of a drive of a lay brake to a casing ступичной assemblages |
8 |
| Bolts of fastening of the longitudinal lever of a back suspension bracket |
- To ступичной to assemblage
|
123 |
|
|
113 |
| Bolts of fastening of cross-section levers of a back suspension bracket |
- To ступичной to assemblage
|
177 |
|
|
113 |
| Nut of fastening of draught of the gauge of adjustment of an inclination of headlights to the cross-section lever №2 back suspension brackets |
5.4 |
| Bolt of fastening of the holder of a flexible brake hose to the shock-absorber of a back suspension bracket |
29 |
| Bolts of fastening of the central and back sections of an exhaust pipe |
62 |
| Bolt of fastening of an arm of a cable of a lay brake to a car body |
5 |
| Nuts of fastening of a back stretcher |
|
|
83 |
|
|
181 |
| Nut of fastening of a steering wheel |
35 ÷ 50 |
| Bolts of fastening of an overlay of a steering wheel |
7.1 ÷ 8.8 |
| Bolt of fastening of the hinge of a steering shaft |
36 |
| Nuts of fastening of assemblage of a steering column |
26 |
| Bolts of fastening of an intermediate shaft of a steering column |
36 |
| Connecting bolt of the bottom fastening of a steering column to its bottom support |
19 |
| Bolts of fastening of an arm of the index of turns |
4 |
| Fixture of assemblage of the steering mechanism |
181 |
| Fixture of lines ГУР to the steering mechanism |
23 (25) * |
| Fixture of tightening laths of the steering mechanism |
|
|
7.8 |
|
|
9.8 |
| Bolts of fastening of the case of control valve GUR to the case of the steering mechanism |
18 |
| Самоконтрящаяся a nut of a shaft of control valve GUR |
25 |
| Cover of the case of the steering mechanism |
59 |
| Counternut of a cover of a spring directing рейки the steering mechanism |
50 (69) * |
| Fixture of steering draughts |
60 (83) * |
| Fixture of returnable tubes ГУР to the case of the steering mechanism |
12 (13) * |
| Coupling bolts of pump GUR |
24 |
| The union of pressure head port of pump GUR |
83 |
| Bolt of the union of sucking away port of pump GUR |
13 |
| Fixture of a forward arm of pump GUR to the back |
43 |
| Nut of fastening of a pulley of pump GUR |
43 |
| Bolts (A//B) fastenings of assemblage of pump GUR |
29 (43) *//43 |
| The gauge of pressure of liquid ГУР |
21 |
| Tube of dump of pressure to pump GUR |
21 |
* In brackets efforts of a tightening without use of special adaptations are specified.