LEXUS RX 300

1998-2003 of release

Repair and car operation



Lexus RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmissionnaja line
- Brake system
   The general information and security measures
   Removal, installation and check of pedals of brake system
   Check of brake system through a socket of the module of management
   Removal and installation of the tank and the main brake cylinder (ГТЦ)
   Removal, check and installation of the amplifier of brakes
   Replacement brake pads
   Removal, dismantling, check, assemblage and installation of supports of brake mechanisms
   Dismantling, check and assemblage of a lay brake
   Check of the valve of distribution of brake effort
   Removal and installation of the activator of brakes
   Removal and installation of wheel gauges
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections




Removal and installation of wheel gauges

The forward gauge of speed

The back gauge of speed

The forward gauge of speed

 PERFORMANCE ORDER

  1. Remove a forward wheel and локер its arches.
  2. Separate a socket of the gauge of speed.
  3. Turn out a bolt and remove the holder of a flexible hose and electroconducting of the gauge of speed from a suspension bracket rack.
  4. Remove from a suspension bracket rack a rubber clip, turn out a bolt and remove from a body of the car the holder of electroconducting of the gauge of speed.
  5. Screw a bolt and remove the gauge of speed from a rotary fist.

The forward gauge of speed

 PERFORMANCE ORDER

  1. Remove a back seat, a protective plate and lateral furnish of a seat.
  2. Separate a socket of electroconducting of the gauge of speed and extend it it together with consolidation.
  3. Turn out two coupling bolts of fastening of electroconducting of the gauge of speed to a body and a suspension bracket rack.
  4. Turn out a bolt and remove the gauge.