1998-2003 of release

Repair and car operation

Lexus RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
- The engine
   The general information and preparatory operations
   Check компрессионного pressure
   Check of the engine by means of the vacuum gauge
   Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
   Check of a corner of an advancing of ignition
   Removal, check and installation of a belt of drive ГРМ it натяжителя, a pulley and a cogwheel of a cranked shaft, cogwheels of camshafts and intermediate rollers
   Removal, dismantling, check, assemblage and installation of a head of cylinders and its components
   Removal and engine installation, check of support
   The block of cylinders
   Check Д/В of pressure of impellent oil
   Removal, dismantling, check, assemblage and installation of the oil pump and the pallet картера
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

Check Д/В of pressure of impellent oil

Site Д/В of impellent oil


  1. Turn out Д/В and establish on its place a manometre.
  2. Warm up the engine to normal working temperature.
  3. Consider indications of a manometre and compare to requirements of Specifications of the Head the Engine.
  4. Remove a manometre and screw to the place of Д/В pressure of impellent oil, preliminary having greased its carving with fixing hermetic, for example, Loctite 242.
  5. Tighten Д/В with effort of 13 Nanometers.
  6. Start the engine and make sure of absence of leaks of oil.