LEXUS RX 300

1998-2003 of release

Repair and car operation



Lexus RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   + System of cooling of the engine
   - Systems of heating, ventilation and air conditioning
      The general information
      Replacement, dismantling and block K/V assemblage
      Removal, dismantling, assemblage and installation of the block of the fan of a heater
      Check and replacement of the compressor and magnetic coupling К/В
      Removal and condenser K/V installation
      Checks of components of systems of heating and К/В
      Removal and installation of the block of management
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections




Removal and condenser K/V installation

Components of installation of condenser K/V

1 — the Condenser
2 — the Sealing ring
3 — the Digit hose

4 — the Liquid tube
5 — the Top casing of a radiator


 PERFORMANCE ORDER

  1. Discharge system K/V.
  2. Unfasten 7 clamps and remove the top casing of a radiator.
  3. Remove a forward bumper (the Body see the Head).
  4. Turn out two bolts and separate a digit hose and a liquid tube, then as soon as possible закупорьте open branch pipes.
  5. Disconnect a clip of a liquid tube, turn out two bolts and pull out the condenser.
  6. Installation are made in an order, the return to an order of dismantle of components. Use new sealing rings of a digit hose and a liquid tube. If the new condenser is established, fill with its refrigerator oil according to requirements of Specifications of the Head of System of cooling of the engine, heating, ventilation and an air conditioning.