1998-2003 of release

Repair and car operation

Lexus RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   - The power supply system
      The general data and security measures
      Sbrasyvanie pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air cleaner installation
      Removal, installation and adjustment of the case of a throttle and gauge TPS
      Removal and installation of components of system ACIS
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

Removal and installation of components of system ACIS

System ACIS components

1 — Valve ACIS
2 — the Vacuum hose of activator ACIS
3 — the Lining

4 — a weight Cable
5 — the grounding Tyre


  1. Disconnect a vacuum hose from the activator and separate socket DLC №1.
  2. Give 4 nuts and remove socket DLC №1 from its arm. Disconnect a cable of weight and the tyre of grounding from valve ACIS.
  3. Hook valve ACIS a screw-driver and remove it with воздухораспределителя together with a lining.
  1. At installation grease rubber parts with impellent oil and put прокладочный a material (№ 08826-0008 under catalogue Toyota/Lexus) on the specified sites of the valve. Use a new lining. Tighten nuts with effort of 14.5 Nanometers.