1998-2003 of release

Repair and car operation

Lexus RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   - The power supply system
      The general data and security measures
      Sbrasyvanie pressure in fuel system
      Principle of functioning of a control system of fuel injection
      Checks of system of injection
      Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel
      Removal and installation of fuel distributive highways and injectors
      Removal and installation of a fuel tank and fuel lines
      Removal and air cleaner installation
      Removal, installation and adjustment of the case of a throttle and gauge TPS
      Removal and installation of components of system ACIS
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

Removal and air cleaner installation


  1. Separate a socket of electroconducting of gauge MAF, turn out two screws and remove gauge MAF together with a lining from an air cleaner cover.
  1. Disconnect hose EVAP from tube EVAP, and also hose PCV from a cover of the left number of cylinders.
  1. Wring out two clamps of a cover of an air cleaner and remove it from the air cleaner case.
  1. Wring out two clamps and disconnect a hose of an air cleaner from the throttle case.
  2. Liberate a torso of a drive throttle заслонки from a clip.
  3. Uncover an air cleaner together with a hose.
  4. Pull out filtering element.
  5. Turn out three bolts and remove the air cleaner case.
  6. Wipe the case of an air cleaner pure rags.
  7. Establish a new filtering element in the case, close a cover and fix its clamps.
  8. Join all separated connections.